Termix/plugins/host-metrics/locales/translated/zh_CN.json

{
  "hostMetrics": {
    "cpu": "CPU",
    "memory": "内存",
    "disk": "磁盘",
    "network": "网络",
    "uptime": "运行时间",
    "processes": "进程",
    "available": "可用",
    "free": "空闲",
    "connecting": "连接中...",
    "connectionFailed": "连接服务器失败",
    "naCpus": "N/A CPU",
    "cpuCores_one": "{{count}} 核心",
    "cpuCores_other": "{{count}} 核心",
    "cpuUsage": "CPU 使用率",
    "memoryUsage": "内存使用率",
    "diskUsage": "磁盘使用率",
    "selectFilesystem": "选择文件系统",
    "temperature": "温度",
    "highestTemperature": "最高温度",
    "primaryTemperatureSensor": "主传感器",
    "gpu": {
      "title": "GPU",
      "noDevice": "未检测到NVIDIA GPU。请安装NVIDIA驱动程序（它提供nvidia-smi）以查看GPU指标。",
      "driver": "司机 {{version}}",
      "utilization": "利用率",
      "memory": "显存",
      "temperature": "温度",
      "power": "力量",
      "fan": "扇子",
      "processes": "GPU 进程",
      "noProcesses": "没有进程正在使用 GPU"
    },
    "failedToFetchHostConfig": "获取主机配置失败",
    "serverOffline": "服务器离线",
    "cannotFetchMetrics": "无法从离线服务器获取指标",
    "totpFailed": "TOTP 验证失败",
    "noneAuthNotSupported": "主机指标不支持 'none' 认证类型。",
    "noHostSelected": "未选择主机",
    "load": "负载",
    "systemInfo": "系统信息",
    "hostname": "主机名",
    "operatingSystem": "操作系统",
    "kernel": "内核",
    "seconds": "秒",
    "networkInterfaces": "网络接口",
    "noInterfacesFound": "未找到网络接口",
    "noProcessesFound": "未找到进程",
    "processesTotal": "总计",
    "processesRunning": "运行中",
    "loginStats": "SSH 登录统计",
    "noRecentLoginData": "无最近登录数据",
    "executingQuickAction": "正在执行 {{name}}...",
    "quickActionSuccess": "{{name}} 执行成功",
    "quickActionFailed": "{{name}} 执行失败",
    "quickActionError": "执行 {{name}} 失败",
    "ports": {
      "title": "监听端口",
      "protocol": "协议",
      "port": "端口",
      "address": "地址",
      "process": "进程",
      "search": "搜索端口...",
      "allProtocols": "全部",
      "noData": "无监听端口数据"
    },
    "firewall": {
      "title": "防火墙",
      "inactive": "未激活",
      "policy": "策略",
      "rules": "规则",
      "noRules": "该链中无规则",
      "noData": "无可用防火墙数据",
      "action": "操作",
      "protocol": "协议",
      "port": "端口",
      "source": "来源",
      "anywhere": "任意",
      "chains": "链"
    },
    "loadAvg": "平均负载",
    "swap": "交换空间",
    "architecture": "架构",
    "refresh": "刷新",
    "retry": "重试",
    "customize": "自定义布局",
    "reset": "重置",
    "tabLive": "实时",
    "editModeInstructions": "拖动卡片可重新排序，拖动底部边缘可调整大小，使用宽度按钮可更改卡片的跨度。在下方添加或移除卡片。",
    "managers": {
      "services": "服务",
      "processInspector": "进程查看器",
      "logViewer": "日志查看器",
      "cron": "定时任务",
      "packages": "软件包",
      "ssl": "SSL证书",
      "firewall": "防火墙",
      "users": "用户与权限",
      "healthCheck": "健康检查",
      "diskBreakdown": "磁盘详情",
      "systemdTimers": "计时器",
      "topMemory": "按内存占用排行",
      "noData": "无数据",
      "sudoHint": "在主机编辑器中为此主机设置 sudo 密码以启用特权操作。",
      "filter": "筛选...",
      "start": "启动",
      "stop": "停止",
      "restart": "重启",
      "actionDone": "{{name}} 已更新",
      "actionFailed": "操作失败",
      "signalSent": "信号已发送至 PID {{pid}}",
      "killHint": "单击：终止 (SIGTERM)。右键单击：强制终止 (SIGKILL)。",
      "working": "处理中...",
      "update": "更新",
      "upgradeAll": "全部升级",
      "allUpToDate": "所有内容均为最新",
      "save": "保存",
      "command": "命令",
      "enabled": "已启用",
      "cronSaved": "定时任务已更新",
      "clients": "客户端",
      "dryRun": "试运行",
      "renew": "续期",
      "noAcmeClient": "此主机上未找到 ACME 客户端 (certbot 或 acme.sh)。",
      "addInputRule": "添加 INPUT 规则",
      "firewallWarning": "更改仅在运行时有效，需持久化保存。小心不要将自己锁定在外。",
      "ruleApplied": "规则已应用",
      "invalidPort": "请输入有效端口 (1-65535)",
      "newUsername": "新用户名",
      "addUser": "添加",
      "deleteUser": "删除用户",
      "noHealthChecks": "尚未配置健康检查。",
      "follow": "跟踪",
      "noLogData": "无日志输出。",
      "tree": "树形",
      "enableDisable": "启用/禁用开机自启",
      "grantSudo": "授予 sudo",
      "revokeSudo": "撤销 sudo",
      "sslIssueCert": "签发证书",
      "sslExpired": "已过期",
      "sslInDays": "{{days}} 天后",
      "sslNeedDomain": "至少输入一个域名",
      "sslIssued": "证书已签发",
      "sslDomainsPlaceholder": "example.com, www.example.com",
      "sslHttpStandalone": "HTTP (独立模式)",
      "sslHttpWebroot": "HTTP (webroot)",
      "sslDns": "DNS",
      "sslDnsProvider": "DNS 提供商 (如 cloudflare)",
      "sslIssueHint": "DNS 提供商凭据必须已在主机上配置。",
      "sslRevoke": "吊销证书",
      "sslRevoked": "证书已吊销",
      "sslRevokeConfirm": "吊销并删除证书 \"{{name}}\"？此操作无法撤销。",
      "healthRun": "运行",
      "healthName": "名称",
      "healthTarget": "主机 / 地址",
      "healthAddCheck": "添加检查",
      "healthSaved": "健康检查已保存",
      "healthMissingFields": "每个检查都需要名称和目标",
      "logFile": "文件",
      "logUnit": "单元",
      "logCustomPath": "自定义路径 (位于 /var/log 下，可选)",
      "logGrep": "过滤行...",
      "firewallPersist": "持久化规则",
      "firewallPersisted": "防火墙规则已持久化",
      "wireguard": "WireGuard",
      "tailscale": "Tailscale",
      "wgNotInstalled": "此主机未安装 WireGuard",
      "wgNoInterfaces": "未配置 WireGuard 接口",
      "wgInterfaceUp": "启用",
      "wgInterfaceDown": "停用",
      "wgBringingUp": "正在启用 {{name}}...",
      "wgBringingDown": "正在停用 {{name}}...",
      "wgInterfaceUpDone": "{{name}} 已启用",
      "wgInterfaceDownDone": "{{name}} 已停用",
      "wgListenPort": "端口",
      "wgPublicKey": "公钥",
      "wgEndpoint": "对端",
      "wgAllowedIPs": "允许的 IP",
      "wgLastHandshake": "上次握手",
      "wgHandshakeNever": "从未",
      "wgTransfer": "传输",
      "tsNotInstalled": "此主机未安装 Tailscale",
      "tsRunning": "运行中",
      "tsStopped": "已停止",
      "tsEnable": "连接",
      "tsDisable": "断开连接",
      "tsEnabling": "正在连接到 Tailscale...",
      "tsDisabling": "正在断开 Tailscale 连接...",
      "tsEnabled": "Tailscale 已连接",
      "tsDisabled": "Tailscale 已断开连接",
      "tsIPs": "Tailscale IP",
      "tsPeers": "节点",
      "tsOnline": "在线",
      "tsOffline": "离线",
      "tsExitNode": "出口节点",
      "tsExitNodeActive": "出口节点活跃",
      "tsHostname": "主机名"
    }
  },
  "metricsHistory": {
    "title": "指标历史",
    "historySuffix": "历史",
    "cpuMemoryDisk": "CPU / 内存 / 磁盘",
    "network": "网络",
    "download": "RX",
    "upload": "TX",
    "noData": "此时间范围内没有可用的历史数据。",
    "custom": "自定义",
    "to": "至",
    "apply": "应用",
    "viewHistory": "查看历史"
  },
  "proxmoxStats": {
    "tabTitle": "Proxmox 统计数据",
    "cpuUsage": "CPU 使用率",
    "memoryUsage": "内存使用情况",
    "diskUsage": "磁盘使用情况",
    "networkInterfaces": "网络接口",
    "uptime": "正常运行时间",
    "systemInfo": "系统信息",
    "guestsSummary": "客户主机",
    "storagePools": "存储池",
    "clusterHealth": "集群健康",
    "cpuCores_one": "{{count}} 核",
    "cpuCores_other": "{{count}} 核",
    "used": "已用",
    "total": "总计",
    "hostname": "主机名",
    "kernel": "内核",
    "pveVersion": "PVE 版本",
    "name": "名称",
    "status": "状态",
    "type": "类型",
    "cpu": "CPU",
    "mem": "内存",
    "disk": "磁盘",
    "running": "运行中",
    "stopped": "停止",
    "guestCounts": "{{running}}/{{total}} 运行中",
    "inactive": "未激活",
    "notClustered": "独立节点（非集群的一部分）",
    "quorate": "达到法定节点数量",
    "notQuorate": "未达到法定节点数量",
    "nodeOnline": "在线",
    "nodeOffline": "离线",
    "noHostSelected": "未选择主机",
    "pveshNotFound": "未找到 pvesh - 这是 Proxmox 节点吗？",
    "nodeDetectionFailed": "无法确定有效的 Proxmox 节点名称",
    "connecting": "正在连接...",
    "connectionFailed": "连接到 Proxmox 节点失败",
    "refresh": "刷新",
    "searchGuests": "搜索客户主机...",
    "filterAll": "全部",
    "filterVm": "虚拟机",
    "filterLxc": "LXC",
    "noGuests": "此节点上未找到虚拟机或 LXC 容器。",
    "noGuestsMatch": "没有符合当前筛选条件的客户主机。"
  },
  "nav": {
    "hostMetrics": "主机指标"
  },
  "hosts": {
    "tabHostMetrics": "主机指标",
    "enableProxmoxStats": "启用 Proxmox 统计信息",
    "enableProxmoxStatsDesc": "显示此主机的 Proxmox 统计信息标签页，其中包含通过 SSH 收集的实时节点、客户机、存储和集群统计信息。",
    "proxmoxStatsPollInterval": "轮询间隔（秒）",
    "proxmoxStatsPollIntervalDesc": "最短间隔 15 秒。Proxmox 节点统计信息刷新频率。",
    "proxmoxStatsNodeOverride": "覆盖节点名称",
    "proxmoxStatsNodeOverrideDesc": "覆盖自动检测的 Proxmox 节点名称（默认情况下通过主机名检测）。",
    "proxmoxStatsNodeOverridePlaceholder": "从主机名自动检测",
    "metricsCollectionLabel": "指标收集",
    "enableMetricsLabel": "启用指标",
    "enableMetricsDesc": "从此主机收集 CPU、RAM、磁盘和其他指标",
    "useGlobalMetrics": "使用全局间隔",
    "useGlobalMetricsDesc": "使用服务器范围的指标间隔覆盖",
    "metricsIntervalS": "指标间隔（秒）",
    "metricsIntervalDesc2": "指标快照之间的秒数",
    "excludedMountsLabel": "排除的挂载点",
    "monitoredMountsLabel": "自定义监控路径",
    "monitoredMountsDesc": "添加未作为单独挂载点公开的路径，包括绑定挂载的 Home Assistant 路径，例如 /config。",
    "monitoredMountPathPlaceholder": "路径（/config，/mnt/data）",
    "monitoredMountLabelPlaceholder": "标签（可选）",
    "addMonitoredMount": "添加路径",
    "excludedMountsDesc": "隐藏此主机磁盘使用情况和警报中的特定挂载点或文件系统类型（例如 nfs、cifs）。",
    "excludedMountsPlaceholder": "挂载路径（/mnt/nas）或文件系统类型（nfs、cifs）",
    "excludedMountsEmpty": "未排除任何挂载点。显示所有检测到的文件系统。",
    "addExcludedMount": "添加",
    "visibleWidgets": "可见小部件",
    "widgetsMovedToHostMetrics": "卡片现在可在“主机指标”选项卡中直接添加、排列和调整大小。打开此主机的“主机指标”，使用“自定义”选择要显示的卡片。",
    "quickActionsLabel": "快速操作",
    "quickActionsToolbar": "快速操作以按钮形式显示在主机指标工具栏中，以便一键执行命令。",
    "noQuickActions": "尚无快速操作。",
    "buttonLabel": "按钮标签",
    "selectSnippetPlaceholder": "选择代码片段...",
    "addActionBtn": "添加操作"
  },
  "onboarding": {
    "feature_metrics": "指标与告警",
    "feature_metrics_desc": "跟踪 CPU、内存和磁盘的运行情况，并在它们出现故障时发出告警。"
  },
  "admin": {
    "metricsHistoryRetention": "指标历史保留",
    "metricsHistoryRetentionRange": "1 到 90 天",
    "days": "天"
  },
  "homepage": {
    "noData": "暂无数据",
    "showCurrentValue": "显示当前值",
    "chartMetric": "指标",
    "metricRange": "范围"
  }
}